Military Grade High Temperature Heat Shrink Marker
Request a Quote
CYG-MT (F)
Heat Shrinkable Identification Sleeve for Wire & Cable Management
- Material: Cross-linked modified polyolefin
- Shrink ratio: 2:1 / 3:1
- Compliant with "RoHS" environmental standards
- Flexible, temperature-resistant, and high flame-retardant
- Superior printing performance for long-lasting identification
Applications
- Our military grade high temperature heat shrink marker is the ideal choice for permanent identification and insulation protection of wires, cables, and electronic devices in military, aerospace, and specialty environments.
- Its superior high-temperature resistance, mechanical strength, clear printing, and electronic insulation properties make it an ideal solution for demanding applications.
Features
- Compliant with "RoHS" environmental standards
- Flexible, temperature-resistant, and high flame-retardant
- Superior printing performance for long-lasting identification
- Meets GJB 7278-2011 standards
| Properties | Test Method | Typical Value | ||
| Operating temperature (℃) | - | -55~200 | ||
| Water absorption (%) | 23℃/24h | ≤0.5 | ||
| Specific gravity (g/cm³) | GB/T 1033.1 | ≤2.00 | ||
| Longitudinal change (%) | - | -15~10 | ||
| Tensile strength (MPa) | 500mm/min | ≥24.3 | ||
| Ultimate elongation (%) | 500mm/min | ≥300 | ||
| After aging 175℃/168h | Appearance | unidirectional rubbing for 50 times | the print is clearly visible | |
| Ultimate elongation (%) | 500mm/min | ≥100 | ||
| Insulation and voltage withstand | 2500V/60s | No breakdown | ||
| Dielectric strength (kV/mm) | - | ≥ 15.7 | ||
| Volume resistivity (Ω·cm) | - | ≥1012 | ||
| Fluid resistance | Appearance | Unidirectional rubbing for 20 times | the print is clearly visible | |
| Heat shock | 275℃//4h | No dripping, no flowing, no cracking; After unidirectional rubbing for 50 times, the print is clearly visible; | ||
| Printing durability | Rubbing for 30 times | the print is clearly visible | ||
| Low temperature flexibility | -55℃/4h | No cracking | ||
| Copper corrosion | 200℃/16h | No corrosion | ||
| Flammability | - | Self-extinguishing within 15s | ||
| Cold & heat shock test | -55℃, 200℃ | Ultimate elongation ≥100%; After unidirectional rubbing for 50 times, the print is clearly visible | ||
| Fungal test | GJB 150.10 | Better than class 1 | ||
| Salt spray test | GJB 150.11 | Ultimate elongation ≥100%; After unidirectional rubbing for 50 times, the print is clearly visible | ||
| Damp heat test | GJB 150.9 | Ultimate elongation ≥100%; After unidirectional rubbing for 50 times, the print is clearly visible | ||
Shrink Ratio: 2:1
| Size | As Supplied (mm) | After Recovery (mm) | |
| Minimum Inside Diameter | Maximum Inside Diameter | Wall Thickness | |
| Ø2.4 | 2.4 | 1.2 | 0.38±0.08 |
| Ø3.2 | 3.2 | 1.6 | 0.38±0.08 |
| Ø4.8 | 4.8 | 2.4 | 0.38±0.08 |
| Ø6.4 | 6.4 | 3.2 | 0.38±0.08 |
| Ø9.5 | 9.5 | 4.8 | 0.38±0.08 |
| Ø12.7 | 12.7 | 6.4 | 0.38±0.08 |
| Ø19.1 | 19.1 | 9.5 | 0.38±0.08 |
| Ø25.4 | 25.4 | 12.7 | 0.43±0.10 |
| Ø38.1 | 38.1 | 19.1 | 0.43±0.10 |
| Ø50.8 | 50.8 | 25.4 | 0.58±0.10 |
Note:
1. Color options are available in white (standard color) or other customer-specific colors.
2. Custom sizes are available upon request.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
