Fujikura 70R Ribbon Fusion Splicer
Many high fiber count cables are made from ribbons of fibers, usually 12 fibers per ribbon. So, splitting all these fibers out to splice individually is a difficult and time consuming job. Given this, the Fujikura 70R ribbon fusion splicer is developed to splice a ribbon of fibers at one time.
Feature
1. This mass fusion splicer is able to complete splicing process in 11 seconds at SM-FAST mode, and it only takes 18 seconds to heat the FP-04 (T) heat shrinkable tube.
2. If the Li-ion battery is fully charged, it can finish 110 times of splicing and heating cycles, and the electrode gives over 1500 times of electric arc cycle.
3. Thanks to the automatic wind protector and tube heater, our ribbon splicer reduces required operational steps, and it also realizes convenient working as a result of the carrying case which has an integrated workstation.
4. The ribbon fusion splicer could deliver satisfying performance even under extreme conditions because it is resistant to dust, rain and shock. In addition, the observation system doesn't require retroreflectors.
Technical Data of Fujikura 70R Ribbon Fusion Splicer
| Alignment method | Cladding alignment |
| Applicable fiber | SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657) |
| Cladding diameter | 125μm |
| Cleave length | 10~13mm |
| Splicing/heating mode | 100 splicing modes and 30 heating modes |
| Splice loss | 0.05dB(SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS) |
| Splicing/heating time | 11 seconds for splicing standard SM fiber at SM-FAST mode, 18 seconds for heating standard FP-04 (T) heat shrinkable tube |
| Splicing result storage | Last 2000 records |
| Viewing method/magnification | 2 axis CMOS camera with 4.73" color LCD |
| 35-90X for X/Y | |
| Tension test | 1.96~2.25N |
| Heat shrinkable tube | 60mm, 40mm and Fujikura micro tube |
| No. of splicing and heating per battery (fully charged) | 110 cycles with BTR-09 (4000mAH) Li-ion battery |
| Electrode life | 1500 splices |
| Size/weight | 146W×159D×150H (mm), 2.5kg (including battery) |
| Operation condition | Altitude: 0-3660m above sea level Wind: 15m/s Temperature: -10℃~ 50℃ Humidity: 0-95%RH |
| Shock/dust/rain resistance | Shock: 76cm all surface drop |
| Rain: H=10mm/hr for 10 minutes, IP2X | |
| Dust: Exposed to dust (0.1-500μm alumina silicate), IP5X |
Standard Package
| Name | Model | Qty. |
| Ribbon fusion splicer | 70R | 1pc |
| High precision fiber cleaver | CT-30 | 1pc |
| Battery | BTR-09 | 1pc |
| Battery charge cord | DCC-18 | 1pc |
| AC adapter | ADC-18 | 1pc |
| AC power cord | ACC-17 | 1pc |
| Fiber holder | FH-50-XX | 2 pairs |
| Thermal jacket stripper | HJS-02 | 1pc |
| Screw driver | SD-01 | 1pc |
| Alcohol pot | AP-01 | 1pc |
| Carrying case | CC-30 | 1pc |
| Spare electrodes | ELCT2-20A | 1pc |
| Instruction manual and software (CD) | M-70 | 1pc |
| USB cable | USB-01 | 1pc |
| Sleeve loader | SL-01 | 1pc |
| Warning and cautions | W-70-E | 1pc |
| Quick reference guide | Q-70R | 1pc |
