Heat Shrink End Cap

Heat Shrink End Cap
Request a Quote

Our heat shrink end cap, made from polyolefin material and hot melt adhesive, offers a dual-wall construction for sealing and protecting power and communication cable ends against oxidation caused by oxygen, ozone, or UV exposure during installation, storage, and transportation.

Dimensions
Size As Supplied (mm) After Recovery (mm)
Inside Diameter Wall Thickness Height Inside Diameter Wall Thickness
Ø12 ≥12 1.0±0.3 45±5 ≤5 2.5±0.3
Ø16 ≥16 1.1±0.3 75±5 ≤8.5 2.5±0.3
Ø20 ≥20 1.0±0.3 75±5 ≤8.5 2.5±0.3
Ø25 ≥25 1.1±0.3 84±5 ≤11 2.5±0.3
Ø30 ≥30 1.2±0.3 94±5 ≤16 3.0±0.3
Ø35 ≥35 1.0±0.3 94±5 ≤18 2.6±0.3
Ø40 ≥40 1.2±0.3 94±5 ≤18 2.6±0.3
Ø55 ≥55 1.0±0.3 125±5 ≤26 2.5±0.3
Ø75 ≥74 1.2±0.3 145±5 ≤31 3.2±0.3
Ø88 ≥88 1.8±0.3 140±5 ≤40 5.0±0.4
Ø100 ≥97 1.2±0.3 140±5 ≤40 5.0±0.4
Ø103 ≥103 1.9±0.3 150±5 ≤57 4.4±0.4
Ø120 ≥120 1.3±0.3 150±5 ≤57 4.4±0.4
Ø140 ≥140 1.3±0.3 184±5 ≤63 4.0±0.4
Ø160 ≥160 2.2±0.3 270±5 ≤95 4.0±0.4
Ø180 ≥180 2.1±0.3 270±5 ≤95 4.0±0.4
Ø200 ≥200 1.7±0.3 270±5 ≤95 4.0±0.4
Ø250 ≥245 1.6±0.3 270±5 ≤95 4.0±0.4

Note: Flame retardant heat shrink end cap can be customized upon request.

Technical Data
Properties Test Method Performance
Tensile strength GB1040 ≥12MPa
Ultimate elongation GB1040 ≥300%
Tensile strength after aging GB7141/130℃,168hrs ±20%
Ultimate elongation after aging GB7141/130℃,168hrs ±20%
Dielectric strength GB1408 ≥15kV/mm
Volume resistivity GB1410 ≥1×1013 Ω·cm
Brittleness temperature GB5470 -40℃
Related products
Send Message
Other Products
Inquiry
Inquiry