Non-Stop Matrix Turret Rewinder, WBC-350
Self-adhesive label waste matrix rewinding machine
The non-stop matrix turret rewinder offered by Daba Machinery ensures continuous winding of self-adhesive matrix produced by a combined printing and die cutting process. The sticky matrix is wound to a self-made additive core, to which the leading edge will be transferred by the bump and the cutter as the rewinding roll reaches its maximum diameter. Then, the full roll is pneumatically pushed into a safely stop position to allow for an ergonomic lift-off by the operator. A lay on-roller, non-stick coated rollers and a speed fine control potentiometers guarantee a material independent stripping-and winding quality.
All rolls including plastic films, aluminum foils, adhesive labels, thermal paper, etc.
Non-stop cold foil stamping, waste removal and rewinding.
- Pressure roller
- Rewinding roller
- Turret unit
- Storagerack with dancing roller
- Touch screen
| Model | WBC-350 |
| Maximum Unwinding Diameter | 350mm |
| Maximum Rewinding Speed | 180m/min |
| Material Splicing Method | Fully automatic splicing at pre-set speed |
| Tension Control Method | Automatic constant tension control |
| Total Power | 2.5kw |
| Dimensions (L*W*H) | 780mm*1000mm*800mm |
- Automatic setting of roll diameter ensures non-stop rewinding.
- Convenient automatic expansion of the machine.
- Cost-effective rewinder specifically developed for flexo printing press in inline non-stop waste removal. Highly flexible in matching with other presses.
- Simple procedures eliminate the need for specialized training.
- Stable tension control system, with piecewise tension coupling method.
- 100% waste collecting rate
- The automatic matrix turret rewinder ensures continuous winding of self-adhesive matrix produced by a combined printing and die cutting process. The leading edge will be transferred to the self-made additive core by the bump and the cutter as the rewinding roll reaches its maximum diameter. Then, the full roll is pneumatically pushed into a safely stop position to allow for an ergonomic lift-off by the operator.
- Reliable roll slitting and rewinding devices including precision cutting wheels and anvils ensure clean cutting.
- Automatic material splicing at pre-set speed.
- Manual unloading part at any time. When the waste material is cut off, the new roller will be connected.
