5 Axis CNC Machine - Marble Cutting Machine
This 5 axis water jet cutting machine is specially used to cut marble and granite, it can compensate 10° cutting angle. It is a kind of bevel cutting machines.
Due to the water jet cutting is a way of flexible cutting, therefore the product cross section after cutting by the traditional 3 axis water jet cutting machine will have a certain degree of inclination. In order to ensure the accuracy of vertical cutting section, it must reduce the cutting speed. However, our 5 axis water jet cutting machine can ensure the accuracy of vertical cutting section by compensating the cutting angle, without reducing the cutting speed. So that it can be used for cutting parquet stone, the parquet flooring does not need to be polished again, which can save time and labor.
Detailed Drawing| Table Model | Unit | YC-L2015 | YC-L2515 | YC-L3015 | YC-L3020 | YC-L4020 | YC-L4030 | YC-X1520 | |
|---|---|---|---|---|---|---|---|---|---|
| Cutting area | mm | 2000 * 1500 | 2500 * 1500 | 3000 * 1500 | 3000 * 2000 | 4000 * 2000 | 4000 * 3000 | 1500 * 2000 | |
| Cutting accuracy | mm | /- 0.1 | /- 0.1 | /- 0.1 | /- 0.1 | /- 0.1 | /- 0.1 | /- 0.1 | |
| Positioning accuracy | mm | /- 0.05 | /- 0.05 | /- 0.05 | /- 0.05 | /- 0.05 | /- 0.05 | /- 0.05 | |
| Repeatability | mm | 0,025 | 0,025 | 0,025 | 0,025 | 0,025 | 0,025 | 0,025 | |
| X,Y dry-run speed | m/min | 0-15 | |||||||
| Cutting speed | m/min | According to the cutting material and thickness | |||||||
| Motion for X.Y | HIWIN/TBI ball screw and guideway, Mitsubishi servo motor to drive | ||||||||
| Materials to cut | Copper, steel, rubber, marble, granite, plastic, glass, aluminium, etc. (almost all kinds), thickness 0-120mm | ||||||||
| Supply condition | Air, water, electricity, abrasive (garnet), hydraulic oil | ||||||||
| Max. pump pressure | mPa | 380/410 | 380/410 | 380/410 | 380/410 | 380/410 | 380/410 | 380/410 | |
| Power | kW/ hp | 30-37/40-50 | 30-37/ 40-50 | 30-37/ 40-50 | 30-37/40-50 | 30-37/40-50 | 30-37/ 40-50 | 30-37/ 40-50 | |
| Controlled by | Siemens | LOGO | LOGO | LOGO | LOGO | LOGO | LOGO | LOGO | |
| Inlet water supply | mpa | >0.4 | >0.4 | >0.4 | >0.4 | >0.4 | >0.4 | >0.4 | |
| Software | Shanghai NAIKY software (NC STUDIO) / MITSUBISHI servo drive / ADVANTECH industrial computer | ||||||||
| Bevel axis(A): /- 10° Rotary axis(B): /- 10° | |||||||||
| Machine power (can be customized) | V(3ph,50/60hz) | 220/380/415 | 220/380/415 | 220/380/415 | 220/380/415 | 220/380/415 | 220/380/415 | 220/380/415 | |
