Two-part Thermal Gap Fillers, Thermal Gap Filling Gel
Request a Quote
Two-part Thermal Gap Fillers, Thermal Gap Filling Gel
GTP-DS two-part thermal gap fillers are a two-component liquid before use, and are similar to thermal pads after curing. With a low stress, they are suitable for dispension to avoid using the entire sheet of thermal conductive materials, and therefore save product costs and reduce material weight. Two-part thermal gap fillers completely fill complex surfaces between heating components and heat sinks, effectively improving the heat dissipation efficiency.
FeaturesAMG provides high quality two-part thermal gap fillers for use in automatic dispensing. We also offer customized products according to your technology and cost requirements.
- High thermal conductivity, max. 4.0 W/m·K
- No need for pre-curing. Room or elevated temperature placing after dispensing achieves the same effect as thermal conductive pads
- Suitable for automatic dispensing
- High temperature resistant
- Excellent insulation. With a breakdown voltage of over 8 kV/mm, it is suitable for high voltage situations
- Stable viscosity in storage and in applications
- Excellent chemical stability and mechanical stability。
- Handheld devices
- Bare die to heat spreader lid
- Filling gaps between heat-generating devices to heat sinks /housings
- Devices requiring low assembly pressure
- BGA, PGA, PPGA
- Thermal conductivity: 1.0~4.0 W/m·K
- Cure: 8 hours at 25 ℃, 10 min at 100 ℃
- Temperature range: -40~+180 ℃
- Shelf life: 6 months from date of manufacture
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
