Dock Shelter

Dock Shelter
Request a Quote
Dock Shelter

Dock Shelter

Our dockshelter is designed for environments where there are demands for high sealingbetween special type trucks and the door opening.  As a type of popular loading dockequipment, the dock shelter is also often applied for warehouses, and it mainly serves to offer high heat insulationperformance and prevent flies, mosquitoes, dust,and rain water entering into the warehouse.

As an experienced dockingsolutions provider, we can design and produce two styles of dockshelters for customers to choose from.

Pillow Type Dock Seals andShelters
Construction
Our pillow type dock shelter is composed of three high quality sealing columns. Its surfaceis made of high density polyester, while the inner is filled with good qualitysponge. Yellow guide strip is attached at the front surface of the columns inthe left and right side.

Optionaldesigns
To match up with trucks with lower height, the dock sheltercan be optionally designed with an additional top curtain. Also optional areyellow colored, finish-scale style strips to increase rubbing and sealingeffect, and protect the sealing columns.
To match up with doors with width over 2500mm, our loading dock seals canbe craft with trapezoidal side sealing columns so as to ensure perfect fit withthe door width.

Installation
Our range of dock shelter can be mounted on a steelstructure with liner frame, or a concrete wall. It can not be mounted ontohollow brick walls. It features an easy installation by tapping screwsand plug bolts.

Specifications
Standard width of side columns: 300mm
Standard height of top column: 300mm
Standard thickness: 250mm


Cover TypeDock Seals and Shelters
Construction

Our cover type dock shelter consists of a frontcurtain, which is one top curtain and two side curtain, and curtains around.The front curtain is made of double-layer 3.0mm high density polyester fiber with yellow guidestrip. While the curtains around is made of 1.0mm high density polyester fiber. The curtains willform a folding wing style sealing when thetruck packs in.

The frame of our dock shelter is made of crush-proof galvanizedsteel and aluminum alloy. Spring is alsoused to balance the frame.

Installation
The same as our pillow type dockshelters, this style of dock equipment can be easily installed onto a steelstructure with liner frame or a concrete wall, by tapping screws andplug bolts. Please notice that our loading dockseals are not designed to be installed onto hollow brick walls.

Usage

Our dock shelter could seal the truck by its retracted sealing curtain when thetruck comes in. The driver should open the backdoor in 270 degrees, fix thedoor by hooks, and then drive the truck reversely according to the yellow guide strips. When the truck gently hits theplatform, the truck will be completely sealed.

Specifications
The standard size of our product is 3400*3400mm, while the width of side curtain and topcurtain are 600mm and 1000mm, respectively. Thedepth is 600mm.


Dock Shelter, Loading Dock Seals, Dock Equipment - Jingxue

Keywords

Dock shelter, loading dock seals, loading dock equipment, docking solutions provider, dock seals and shelters

Description

Both pillow and cover style dock shelters are available for use in places with requirement for high sealing between trucks and door opening. These loading dock seals are also used in warehouses.



 

Related products
Send Message
Other Products
Inquiry
Inquiry