H288Hot Melt Adhesive Applicator

The hot melt adhesive applicator HUAAN provides toyou is a reliable machine that could melt the solid adhesive into fluid at acertain temperature and keep the adhesive’s physical properties by controllingthe overall temperature at a proper value which could avoid any chemicalreactions. Itshigh precision gear pump could ensure stable supply of adhesive to the spraygun or the die head.

During operations, it employs the common adhesive, hot melt pressure sensitiveadhesive or the EVA adhesive whose viscosity is lower than 30,000 cps.Therefore, the available subtype of this equipment for customers include the hot melt adhesive applicator for EVA adhesive,  hot melt adhesiveapplicator for automobile lamps, hot melt adhesiveapplicator for nonwovens and water-basedadhesive machine and so forth.
 
Main Features of Hot Melt AdhesiveApplicator

1. The cast-in heater this adhesive applicator is equipped with could promotethe efficiency of heat conductionandheat up the adhesive tank in a more quick way;

2.Its case, made of special materials, could prohibit carbonization of the meltadhesive and is easy to clean;

3.Its temperature measurement units and the PID controller could ensure astable temperature, enabling the equipment to use various hot melt adhesives.Moreover, this applicating machine enjoys safe operation for it is equippedwith digital display temperature control instrument, overheat alarm, sensordisconnection alarm and power-off protection device;

4. The high-precision gear pump and AC controller of this applicating equipment ensure reliable supply ofadhesive to the die head or the spray head. The supply amount of adhesive couldbe adjusted according to your specific requirements;

5. The control board, of a scientific design, is easy to operate.

Application of Hot Melt Adhesive Applicator

This multifunctional hot melt adhesive applicatoris mainly applied in the bookbinding, the sealing and caulking processes ofrefrigerator productions as well as the production of air-filtration equipment,glue traps, cockroach house, automobile lamps, nonwovens,carpet glue and maternal-infant care products.

Technical Parameters of Hot Melt Adhesive Applicator

AdhesiveSpray Gun

2、_image002.jpg

3、_image003.jpg

4、_image004.jpg

5、_image005.jpg

MainFeatures of Adhesive Spray Gun

1. Of a modular design, this adhesive spray gun is easy to install andoperate;

2. This spray gun, of sound impermeability and strong chemical cohesion force,could deal with nearly any materials;

3. Its needle valve is strengthened by sealing devices made of Teflonmaterials, enjoying sound sealing performance and good wear compensationfunction;

4. Made of quality alloy materials, the needle valve employs a quality valvewhich enjoys an integral design and good concentricity. The sealing ring ofthis valve, made of materials of high mechanical strength which is resistant toheat, wear and corrosion, enjoys excellent sealing performance and longermechanical lifespan;

5. The reflow function of this adhesive spray gun could effectively avoidsmearing which often happens during the high-speed coating operation;

6. The scraper, made of imported quality steels, is resistant to deformation andwear;

7. The margin of adhesive spray area could be adjusted in an accurate way.There is no flying silk when the adhesive is sprayed;

8. Now the adhesive guns that could conduct blade spraying,fiber spraying, spiral spraying or strip spraying are available for customers.

Specially-designed Rubber Pipe

1. Pipelining Made of Teflon Materials

2. Temperature Sensor

3. Heat Insulation Layer

4. Internal Fiberglass Insulation Layer

5. Heating Tube

6. Eternal Fiberglass Insulation Layer

7. Outer Insulation Layer

8. Stainless Steel Braid

9. Nylon Woven Nets

10. Standard Connection Header