Fiber Laser Tube Cutting Machine
Features
The fiber laser tube cutting machine can cut cylinder intersection lines of the main tube in different directions and different diameters. It can work with and without an eccentric mechanism in the vertical intersection of the branch pipe axis and main pipe axis.
This tube cutting machine can cut cylinder intersection line ends on the branch pipe ends, and meet conditions for both eccentric and non-eccentric vertical intersections, as well as inclined intersections of the branch pipe axis and main pipe axis.
This product can cut an inclined end face on circular pipe ends.
It can cut branch pipe intersection line ends that intersect with the circular pipe.
Square pipes can be cut in 360º.
It can cut both square holes and slotted holes in circular pipes.
The fiber laser tube cutting machine can cut various graphics into square pipes, elliptical tubes, U tubes, rectangular tubes and other special shaped tubes.
Technical ParametersModel | LMFC500-G90 | LMFC500-G60 | LMFC500-G30 |
Laser power | 500W | 500W | 500W |
Laser type | Imported fiber laser | ||
Pipe cutting length | ≤9000mm | ≤6000mm | ≤3000mm |
Pipe clamp range | 20-105mm | 20-105mm | 20-105mm |
Pipe clamp range | 20-155mm | 20-155mm | 20-155mm |
Pipe thickness | 0.5-3mm | 0.5-3mm | 0.5-3mm |
Laser line width | 0.15mm | 0.15mm | 0.15mm |
Location precision | ±0.08mm/m | ±0.08mm/m | ±0.08mm/m |
Re-location precision | ±0.04mm | ±0.04mm | ±0.04mm |
Power demand | 380V/50Hz | 380V/50Hz | 380V/50Hz |
Cooling way | Water cooling |
Note: the specific range of processing can be customized according to customer requirements.