Hydraulic Longhole Drilling Rig, KS311
Request a Quote
- Dimensions (L×W×H): 9700×2300×3300mm
- Weight: 16000kg
- Gradeability: 14°
KS311 hydraulic longhole drilling rig is mainly used for long hole drilling and bolting tasks, and it is suitable for underground mines and tunnels with a height range of 3.5m-5m and a width range of 3.5m-5m. This hydraulic longhole drilling rig is capable of 360-degree boom rotation, and configured with swing boom mechanism and guide rail to achieve full 360-degree hole drilling and horizontal coverage with parallel holding of 3 meters, it is versatile for a variety of mining applications.
Dimensions and weight | Drilling system | ||||
Length | 9700mm | Rock drill (drifter) | 1×HC95LH | ||
Width | 2300mm | Impact power | 24kW | ||
Height | 3300 mm | Impact flow | 138L/min | ||
Weight | 16000 kg | Impact pressure | 200bar | ||
Travelling speed, level | 10 km/h | Max. rotary pressure | 210bar | ||
Gradeability | 14° | Impact frequency | 48-57hz | ||
Electric Hydraulic pump unit | Torque | 955Nm | |||
Electric motor | 75kW | Hole diameter | 51-64mm | 64-76mm | 89-102mm |
Impact/feed/positioning | Variable axial piston pump | Drill rod | R32 | T38 | T45 |
Turn around | Gear pumps | Rod length | 1220mm | 1525mm | 1830mm |
Filter precision | 10μ | Boom length | 3200mm | 3500mm | 3800 |
Hydraulic oil tank | 240L | Feed extension | 900mm | 1200mm | 1200mm |
Hydraulic cooler | Water cooler | Drilling depth | 30m | 36m | 36m |
Working pressure | 380V | Boom | Down 20° hypsokinesis65° | ||
Frequency | 50Hz | Beam rotation | 360° | ||
Starting method | Star/delta | Drill area | ±1500mm | ||
Cable reel | 1×K440 | Air and water system | |||
Cable capacity of the reel | 80m | Air Compressor | 1×JN4 | ||
Diameter of cable | 32mm | Capacity | 0.5m3/min | ||
Cable specifications | 3×50 3G10 | Pressure | 5-7bar | ||
Carrier | Device of shank lubrication | Four-wheel drive | |||
Diesel engine | Cummins QSB3.9-C125 93kW/2200rpm | Air consumption for lubrication | 0.3m3/min | ||
Exhaust purification | Exhaust catalyzer | Oil consumption for lubrication | 180-250g/h | ||
Drive system | Four-wheel drive | Water Pump | 1×CR10 | ||
Tires | 12.00-20 | Power | 5.5kW | ||
knuckle mechanic | Articulated steering ±40° | Pump Capacity | 8m3/h | ||
Travel brake | Hydraulic brake | Safe protection | |||
Parking brake | Wet multidisc brake | Noise level | < 100 dB(A) | ||
Fuel tank | 90L | Lifting safety roof | Meet the requirements of FOPS and ROPS |
- The feed beam is supported by hydraulic cylinders to ensure the smooth drilling operation; The hydraulic guide cylinders are used to ensure that bores are drilled with near perfect straightness;
- The articulated chassis with hydraulic drive system is suitable for small to medium-sized tunnels;
- Stepped piston is used in rock drill (drifter), which helps increase drilling speed, improve the efficiency of impact energy transfer from drill to rock, and reduce the consumption of drilling tools while maintaining the condition of the drill rig;
- Rod handling system with a capacity of carrying up to 27 drill rods, and drilling depth can reach 42 meters;
- The hydraulic longhole drilling rig is configured with medium/low pressure hydraulic drifters from Montabert. Hydraulic hoses and seals do not operate in high pressure conditions since the hydraulic drifter works under low oil pressure, thus resulting in prolonged service life, high reliability and less maintenance cost when compared to high pressure hydraulic drifter;
- Low-emission Cummins diesel engine paired with hydraulic four-wheel-drive transmission system is included in the hydraulic longhole drilling rig, achieving stepless speed adjustment, high gradeability and fast walking speed;
- The exhaust purification device is equipped to greatly improve the underground working environment;
- Dual-circuit wet multi-disc service brake and multi-pad parking brake provide safe braking and high stability; In addition, emergency stop buttons at multiple points significantly enhance the safety during underground mining and tunneling operations;
- The compact structure of the drilling rig makes steering more flexible, the powerful articulated chassis allows for steering angle of ±40° and rear axle swing angle of ±10°, enabling the drilling rig to easily pass through tunnels with a minimum width of 2.5m, and safely achieve right angle turns in a 3m wide tunnel;
- The hydraulic longhole drilling rig has a centralized control panel which offers easy operation and gives operator good visibility; In addition, the function of remote control cable control improves the operation safety and maneuverability;
- The hydraulic long hole drilling rig adopts a multi-stage oil cylinder direct propulsion system that is standard for the high-power rock drill, ensuring stable thrust during deep drilling.
- It’s equipped with the original power control valve block from Montabert, France, enabling it to feature automatic impact pressure adjustment, and anti-jamming function. This ensures smooth and accurate hole drilling during the operation.
- This drilling equipment adopts auto-stop device and bottom hole debris clearing function, automatically stopping pushing and impacting after finishing the drilling process.
- The hydraulic drilling rig uses Kaishan brand energy-saving integrated direct-connected screw air compressor for smooth operation and easy maintenance.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos