4000A 11-13 Inches Aluminum Extrusion Process
Request a Quote
(9''-13'') 4000A: This quenching system is special designed for billet diameter range of 8-10 inches and corresponding extruder tonnage, which is used with profiles with large wall thickness. Based on B model, this design increases the lengths of air cooling at the backside, to ensure optimal cooling effect and minimize deformation under high speed extrusion. It is widely working with large extruder.
Main Tech. Data| 1 | Billet spec.: diameter φ228mm---φ330mm | 9 "---13" |
| 2 | Profile envelope : width is 480mm, height 350mm | 480mm,350mm |
| 3 | Required space for the production line | 13500m |
| 4 | Min. space from the center line of press to workshop wall | 2800mm |
| 5 | Max. working power | 195kw |
| 6 | Front air cooling nozzles | 6 columns |
| 7 | Rear air cooling nozzles | 2 columns |
| 8 | Water cooling nozzles | 6 columns |
| 9 | Mist cooling nozzles | 6 columns |
| 10 | Min. flow of industrial softened water per quenching system | 180m³ |
| 11 | Water hardness | 3 ~ 5 °F |
| 12 | Inlet water temp. at quenching system | < 35 °C |
| 13 | Compressed air pressure at top | 6 Bar |
| 14 | Max. flow rate | 3m3/min |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
