CO 2 Laser Power Supply, PS
Request a Quote
- PS-100A
- PS -100/150A
Model | ||
Input Voltage | AC90-250V | |
AC Frequency | 47--63Hz | |
Max. Input Power | 700W | 950W |
Max. Input Current | 7A | 9A |
Max. Output Voltage | 45KV | 55kV |
Max. Output Current | 35mA | 35mA |
Efficiency | ≥90% (at full load) | |
MTBF (mean time between failures) | ≥10000 hours | |
Response speed | ≤1mS (from the switch signal is given to the output current up to 90% of the set current) | |
Withstand voltage | Input-output, input-shell: AC1500V 10mA 60s; Output negative pole is connected with the shell. | |
Control Interface | TTL level switch control, the effective high or low level can be selected (see the description of the control terminal for details) | |
Working environment | Working temperature: -10~40℃ Relative humidity: ≤90% | |
Cooling | Forced air cooling | |
Dimension (L*W*H) (mm) | 295*200*97 | 395*189*111 |
Weight | 2.7kg | 4.6kg |
Shell Color | Black |
- Targeted design: power supply specifically designed for high power CO2 laser tube of 200W-800W.
- Voltage stabilization: provided with power factor correction (PFC) function, it is compatible for different input voltage within a range of AC90-264V, 50/60Hz.
- Strong power: when the input voltage is within an accepted range, it maintains a constant current of up to 45mA.
- High safety: designed with open circuit protection function, this CO2 laser power supply can protect laser equipment from damage caused by no-load condition, thus ensuring safe operation while significantly prolonging the service life of the power supply.
- Simple laser power control: the laser power can be controlled by both 0~5V analog signal and 5V PWM signal.
- Manual test function: it allows operator to quickly detect the fault of power supply and laser.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos