TDSJ-A2 concrete diamond sawing is especially suitable for cutting extremely thick and heavily reinforced concrete or irregular and complex concrete such as bridge's cap beam, box beam, support beam, high speed rail bridge pier, equipment foundations, underwater concrete cutting and so on. Additionally, it is not restricted with cutting depth and has higher working efficiency and is also more applicable for all kinds of environment compared with hydraulic wall sawing machine. Therefore, wire sawing can be provided as a supplemental equipment of hydraulic wall cutting machine, which is widely used in demolition company. In the construction project of demolition company, hydraulic wire sawing is a kind of advanced engineering tools applied to building engineering modification and reinforcement construction.

1. The type of wire sawing is composed of 5 wheels.
2. The wire storage capacity is up to 6.5m.
3. The dimension of diamond concrete wire sawing is 700*720*1760(L*W*H).
4. The machine adopts single guide wheel and single drive motor to realize wire collecting.
5. Our equipment is equipped with single gate protection cover and water spraying function.
6. The machine adopts aluminum magnesium alloy aviation material.
7. Concrete diamond wire sawing is featured as small size and light weight, which is suitable for cutting of small area.

1. Guide wheel adopts magnesium alloy material and the weight of it is approximately one third of iron's. The guide wheels are fastened up and down with good sealing and waterproofing performance. The bearing of wire sawing adopts high speed double raw angular contact ball bearing and increases the width of bearing to enlarge area of thrust surface ensuring more stable and safe operation for guide wheel with higher service life.

2.Machine walking plate is installed with disassemble wrench for the convenience for dismounting, which can adjust eccentric shaft to press tracks and ensure compact connection between plate and tracks. Wire guiding device can move flexibly to adjust cutting angle and also can prevent falling off of wire when stop the machine.

3. The walking type of plate adopts double gear engagement ensuring cutting precision. The shaft of guide wheel adopts square head connection, which has the advantage of convenient dismounting and securing connection.

4. Horizontal bar, driving wheel and track are all clamped with anchor ear structure and four bolts, which is more secure. Compared with all kinds of wire sawing in Team-D, the type of wire sawing is the lightest and simplest in structure, which can be applied to variety of severe conditions.

TD hydraulic power station: 1 piece
Oil pipe: 5 pieces
Water pipe: 1 piece
Clamping piece: 2 pieces
Waterproof plug: 2 pieces
Single structure: 1 piece
Support frame for wire sawing: 1 set, including of one walking and driving large flywheels and two small flywheels and saw tracks

Our machine is featured as simple installation and the wire sawing system can be separated into three parts in a very short time. Besides, only one worker can finish the fixing and installation of the wire sawing equipment.
1. Only install bottom sediments and track.
2. Install driving wheel additionally.
3. Install wire collecting wheel group.