Precision Forging Press for Motorcycle Parts
After years of technical development and innovation, JIASHENG has the ability to provide a wide range of precision forging presses. Our precision forging press for motorcycle parts has enjoyed good reputation for it meets all requirements and standards of the processing for motorcycle parts. Parts produced by our press guarantees high material utilization, low labor cost and high precision, adding to our already high reputation. Both domestic and foreign clients are satisfied with this forging press and many of them become out repeat buyers.
A countless number of motorcycle parts and components produced by our high quality press are delivered all over the world.
Outstanding Features of Our Precision Forging Press 1. The close die forging technique improved the material utilization by 20%-45%, greatly saving the consumption of raw materials.
2. An integrated molding design cuts the processing procedures and reduces the producing cost.
3. Forged by our press, components don’t have to undergo other post processing treatments, achieving shorter manufacturing time and higher working efficiency.
4. We adopt long and smooth guide rails, allowing for high molding precision.
5. In consideration of the problems resulted from high temperature, each sliding sections are installed with a lubricating system.
6. An imported seal ring ensures zero leakage and long lifespan.
7. We have different molding modes, like cross axle, pull bars, gear wheels, wheel hubs, and so forth.
8. Our press possesses good machinery properties.
9. This kind of press finds a huge market in the precision forging of many motorcycle parts.
10. It can also be applied in the finish processing of common carbon steel and stainless steel.
Detailed Information
| Item | Unit | | | |
| Nominal molding force | KN | 3150 | 4000 | 5000 |
| Nominal back pressure | KN | 3150 | 4000 | 5000 |
| Nominal extrusion force | KN | / | / | / |
| Max stroke | mm | 250 | 300 | 300 |
| Stroke of back pressure | mm | 250 | 300 | 300 |
| Extrusion stroke | mm | / | / | / |
| System pressure | MPa | 25 | 25 | 25 |
| Molding speed | mm/s | 30-60 | 30-60 | 30-50 |
| Speed of empty trip | mm/s | 260-330 | 260-330 | 260-330 |
| Speed of return trip | mm/s | 230-270 | 230-270 | 220-270 |
| Molding efficiency | s.p.m | 9-12 | 8-12 | 7-10 |
| Workpiece weight | KG | 1.8 | 2.3 | 2.5 |
| Installed power | KW | 100 | 123 | 151 |
| Item | Unit | | | | |
| Nominal molding force | KN | 6300 | 8000 | 4000 | 5000 |
| Nominal back pressure | KN | 6300 | 8000 | 4000 | 5000 |
| Nominal extrusion force | KN | / | / | 2000 | 3150 |
| Max stroke | mm | 400 | 400 | 300 | 300 |
| Stroke of back pressure | mm | 400 | 400 | 300 | 300 |
| Extrusion stroke | mm | / | / | 150 | 150 |
| System pressure | MPa | 25 | 25 | 25 | 25 |
| Molding speed | mm/s | 25-50 | 25-45 | 30-40 | 30-40 |
| Speed of empty trip | mm/s | 260-320 | 260-320 | 260-330 | 260-330 |
| Speed of return trip | mm/s | 200-250 | 200-250 | 230-270 | 250-270 |
| Molding efficiency | s.p.m | 7-10 | 6-9 | 8-12 | 7-10 |
| Workpiece weight | KG | 3.2 | 3.5 | 2.2 | 2.4 |
| Installed power | KW | 183 | 197 | 123 | 151 |
