CBB20 Round Axial Lead Film Capacitor Manufacturer

CBB20 Round Axial Lead Film Capacitor

Request a Quote

View All: http://jfsolder.com/10-lead-ingot.html

CBB20 axial film capacitor is wound with metalized polypropylene film in non-inductive type. This film capacitor is wrapped with adhesive PET tape and axially welded by tinned copper wire.

Having small size, our film capacitor is easy to install; with good insulation property, low dissipation factor and low temperature rise, this metallized film capacitor can be used in all kinds of filter circuit, noise suppression circuit and low impulse circuit.

Typical Circuit Diagram of Film Capacitor

(1) Audio frequency division capacitor

Parameters of Film Capacitor

Reference Standard		GB10190, IEC 60384-16
Climatic Category		40/85/21
Rated Voltage		250VDC-630VDC
Capacitance Range		1μF-40μF
Capacitance Tolerance		±5%(J), ±10%(K)
Testing Voltage	Between Terminals	1.6×UR(VDC)/10s
Insulation Resistance (20°C)	Between Terminals	≥30,000MΩ, CR≤0.33μF (100Vdc,60s) ≥7,500S, CR >0.33μF (100Vdc,60s)
	Between Terminals and Case	≥100,000MΩ ( 100Vdc,60s)
Tangent of Loss Angle(20°C)		≤0.002 (1KHz )

General Specifications ofFilm Capacitor

(Unit: mm)
Rated Capacitance	250/275VDC			400VDC			630VDC
Rated Capacitance	L	D	Фd	L	D	Фd	L	D	Фd
1.0μF	26	9.5	0.8	26	11.5	0.8	26	16	0.8
1.2μF	26	10.5	0.8	26	13	0.8	25	17.5	0.8
1.5μF	26	11.5	0.8	25	14	0.8	31	17	0.8
2.0μF	26	13	0.8	25	16	0.8	31	19.5	0.8
2.2μF	26	13.5	0.8	25	17	0.8	31	20	0.8
2.5μF	26	14	0.8	25	18	0.8	31	21	0.8
3.0μF	26	15.5	0.8	31	16.5	0.8	31	23	0.8
3.5μF	26	16.5	0.8	31	17.5	0.8	36	22.5	0.8
4.0μF	26	17.5	0.8	31	19	0.8	36	23.5	0.8
4.7μF	26	18.5	0.8	31	20	0.8	36	25.5	0.8
5.6μF	31	18	0.8	31	22	0.8	36	28	0.8
6.8μF	31	19.5	0.8	31	24	0.8	46	26	0.8
8.2μF	31	21	0.8	36	23.5	0.8	46*	28.5	0.8
10.0μF	31	23.5	1.0	36	26	1.0	46	30.5	1.0