470 Standing Seam Panel Roll Forming Machine
The 470 standing seam panel roll forming machine offers an effective solution to roof leak problem that a conventional roof panel machine may often have. It allows the metal roofing sheets to be interlocked at 45 degrees rather than to be bolted, which contributes to a perfect waterproofing effect of the roofs.
Those roll-formed interlocking roof panels are featured by high wave crest, good mechanical strength and safe installation. They are highly effective against water, wind, rainstorm, and so forth. Not only that, this standing seam profiling machine features a high level of automation. It is cheap, durable, lightweight, and very easy to assemble.
Main Features of the Standing Seam Panel Roll Forming Machine
1. This entire roofing sheet making machine comes with an automated control system that uses a highly integrated network to achieve an extraordinary performance.
2. The standing seam sheet roll forming machine is easy to operate, maintain and debug. You can replace the roll forming dies easily.
3. The DVP14ES computer control system paired with a display screen allows operators to use our equipment easily.
Technical Parameters of the 470 Standing Seam Panel Roll Forming Machine
| Total Length of the Rollforming Equipment | 8.5m |
| Machine Width | 1m |
| Machine Height | 1.5m |
| Motor Power | 4kW |
| Operating Voltage | 380V |
| Production Speed | 8~10m/min. |
| Shaft Diameter | 70mm , solid shaft |
| Size of Vertical Plate | 12mm |
| Machine Weight | 4T |
| Drive Method | Chain drive |
| Forming Roll | Surface: hard chrome plating 18 rows of forming rolls |
| Cutter Material | Cr12, high-temperature quenching |
| Power Distribution Box | Consist of a DELTA PLC system and low-voltage electrical devices. |
| Counter | Optical rotary encoder, A40S6-600-2-12-ACP |
| Base Frame | 350H steel |
| Sheet Thickness | 0.3-0.8mm |
| Attachments | A set of standard uncoiler |
