Honeycomb Dehumidifier

Honeycomb Dehumidifier
Request a Quote
SD-H

Drying system for processing hygroscopic engineering plastics

This honeycomb dehumidifier is a drying system designed to deliver dry air with a very low moisture level, perfect for use with hopper dryers in the drying of sensitive engineering plastics during plastic processing. It is not intended for direct processing of plastic materials by itself. It consistently achieves an extremely low dew point of -40°C, although this can vary depending on the surrounding environment and humidity. The unit can handle up to 4,000 m³/hr of airflow. For volatile materials, it should be used with an EOF oil filter to ensure safety and efficiency.


Features
  • Features a P.I.D. temperature control system, ensuring precise temperature management during regeneration.
  • Includes a cooler within the dehumidifying system to maintain a lower return air temperature and dew point.
  • Fitted with a return air filter to prevent contamination from raw material dust, enhancing longevity.
  • Utilizes a comprehensive molecular sieve within its rotor to consistently deliver stable, low dew point dry air, unlike systems with dual towers that may suffer from contamination due to aging sieves.
Specifications
Model SD - 40H 80H 120H 200H 400H 700H 1000H 1500H 2000H 3000H 4000H
Drying air volume (m³/hr) 40 80 120 200 400 700 1000 1500 2000 3000 4000
Air inlet pipe diameter (inch) 2 2 2 2.5 3 4 5 8 8 8 12
Dimensions  
H/H1(mm) 1260 1360 1360 1560 1745 1935 2145/
2505
2060/
2490
2060/
2490
2240/
2670
2060/
2535
W(mm) 510 530 530 660 700 900 1300 1410 1410 2035 2750
D(mm) 860 820 820 1050 1255 1380 1550 2150 2150 2150 2150
Notes: Power: 3φ, 400VAC, 50HZ
Model SD- 40H 80H 120H 200H 400H 700H 1000H 1500H 2000H 3000H 4000H
Regeneration heater power (kW) 3 3 4 4 7.2 10 15 30 28 32 56
Regeneration blower power (kW) 0.12 0.18 0.18 0.4 0.75 1.5 3.75 7.5 7.5 9 5.5×2
Process heater power*(kW) 4 4 6 12 18 24 32 58 80 96 128
Process blower power (kW) 0.18 0.75 0.75 1.5 3.75 7.5 13 11 13×2 13×3 13×4
Drying air volume (m³/hr) 40 80 120 200 400 700 1000 1500 2000 3000 4000
Inlet/outlet pipe diameter (inch) 2 2 2 2.5 3 4 5 8 8 8 12
Cooling water flow rate (L/min) 5 10 15 30 50 80 120 180 240 360 480
Dimensions H(mm) 1260 1360 1360 1560 1745 1935 2145 2060 2060 2240 2060
W(mm) 510 530 530 660 700 900 1300 1410 1410 2035 2750
D(mm) 860 820 820 1050 1255 1380 1550 2150 2150 2160 2250
Weight (kg) 145 170 170 265 330 480 700 1010 1300 1600 2200
Notes:
1) Plastic materials can be fully dried by drying air with dew-point temperature ≤-20℃
2) "*" Stands for drying heater, and "PH" at the end of model code
3) Power: 3φ, 400VAC, 50Hz
 
Related products
Send Message
Other Products
Inquiry
Inquiry