Pressure Control for Fire Protection System
Both an SPDT and DPDT model are available.
Description of Single Pole Double Throw Switch
The P6W-12S pressure control for fire protection systems is a piece of control equipment specially designed for fire protection systems. Not only does it feature a fast SPDT (single pole double throw) switch, but it can also control low pressures. The switch sends out the signal in a fairly small pressure in order to stop operation of the actuators, in order to protect the pressure.
Technical Data of Single Pole Double Throw Switch
Adjust range: 0~0.20 Mpa
Differential: 0.04~0.10 MPa
Max working pressure: 1.6MPa
Switch contact capacity: 220v A.C. 16A, 110V A.C. 24A
Medium: Non-corrosive gas, water and oil
Ambient temperature: -40~ 65 ℃
Medium temperature: -40~ 120℃
Contact capacity: 220v A.C. 16A, 110V A.C. 24A
Description of the Double Pole Double Throw Rapid Action Switch
The P6W-12D pressure control system is designed specifically for fire protection systems. The DPDT (double pole double throw) rapid action switch allows 2 different signals to control the pump inside the fire protection system and send out an alarm signal. It is an automatic controller, and works when the pressure signal is received. When the controlled pressure is higher than the setting pressure, the pressure controller will send a signal to cut off the circuit (or alarm) to halt the water pump, and send out an alarm signal.
Technical Data of Double Pole Double Throw Rapid Action Switch
Adjust Range: 0.05~0.20MPa
Differential: ≤0.04MPa
Max working pressure: 1.6MPa
Switch contact capacity: A.C. 220V 16A A.C.110V 24A
Medium:Non-corrosive gas,water and oil
Ambient temperature: -40~ 65 ℃
Medium temperature: -40~ 120℃
Contact capacity: 220v A.C. 16A, 110V A.C. 24A
OEM services are available on minimum order quantities of 500 units per model. For more details, please contact us.
