Veneer Dryer (Press Type)
This innovative press type veneer dryer is uniquely designed by our technical department based on years of production experience. This woodworking machinery is applicable for the moisturizing, drying and flattening of veneers; it can generate veneers characterized by good flatness and small shrinking percentage.
Advantages
1. Our veneer dryer has low power consumption and small floor space; it can be used in small and medium plywood factory to dry the core veneer.
2. This veneer drying machine allows automatic and programmable control, saving manual operation.
3. Equipped with synchronous closing device, this press dryer can ensure the top layer and the bottom layer have the same moisture content.
4. The slotting design on the hot platen is conductive to the elimination of steam, accelerating the drying process.
Parameters
No. | Item | Unit | Specification |
1 | Nominal total pressure | Ton | 50 |
2 | Rated oil pressure | Mpa | 24.5 |
3 | Size of hot platen(L×W×H) | mm | 2700×1370×42 |
4 | Interval between hot platen | M m | 60 |
5 | Number of hot platen | p.c. | 16 |
6 | Number of layer | 15 | |
7 | Cylinder diameter | mm | 4-Ф125 |
8 | Stroke of cylinder | mm | 900 |
9 | Total power | kW | 16 |
10 | Dimensions (L×W×H) | mm | 4300×1370×3000 |
11 | Net weight | Ton | 2 6 |