0.6/1KV Waterproofed XLPE Insulated Power Cable
Waterproof Cable/ Waterproof Conductor/ Water Resistant Cable
Product characteristics
1. Longitudinal water proofing technology
2. Radial waterproof technology, it can thoroughly prevent the penetration of water molecules.
3. The waterproof layer also has a shielding property to efficiently prevent the electromagnetic field from radiating outside of the cable sheath.
4. Waterproof layer possesses a buffer function to reduce the mechanical damage due to the thermal inflation of the cable.
5. Cable jacketing layer is available to seal the cable connector.
6, The service life of the cable could be 10~15 longer.
Application
It is suitable to providing low voltage power supply to fields that require high moisture resistance.
| Type | Designation | Standard | |
| Copper core | Aluminum core | ||
| FS-YJA FS-YJA23 | FS-YJLA FS-YJLA23 | Copper (aluminum) core waterproofed XLPE insulation aluminum-plastic laminated jacketing power cable Copper (aluminum) core waterproofed XLPE insulation aluminum-plastic laminated jacketing steel strip armoring power cable | IEC60502-1 GB/T12706.1 Q/321023KLA67 |
| Type | Rated voltage kV | Number of core | Nominal cross-section mm 2 | |
| Copper core | Aluminum core | |||
| FS-YJA | FS-YJLA | 0.6/1 | 1 2 3 3 1. 4 | 2.5 ~ 800 1.5 ~ 185 1.5 ~ 300 4 ~ 300 |
| FS-YJA23 | FS-YJLA23 | |||
| Note: material for armoring single core cable should be nonmagnetic. | ||||
Technical parameters
1. DC resistance of the conductor shall be in accordance with the stipulations in GB/T3956.
2. Finished cable shall pass the AC voltage test of 50Hz, 5min, 3500V without breakdown.
3. Insulation resistance constant at 90℃ shall not be less than 3.67MΩ·km.
4. Longitudinal water proof test for water-resisting layer. After 10 times cycle of the water (95~100) ℃, the length water penetrated on two sides shall not be more than 1500mm.
