TS Series Two-Zone Thermal Shock Test Chamber

Request a Quote

Website: http://testchamber-en.com/5-1-two-zone-thermal-shock-test-chamber.html

Environmental chamber for evaluating product reliability through rapid transitions between hot and cold temperature zones

A two-zone thermal shock chamber transfers samples between separate hot and cold sections to create immediate temperature changes. This method is essential for uncovering hidden defects, validating product durability, and ensuring components can tolerate rapid thermal stress during use.

Common Test Applications

High-temperature exposure
Low-temperature performance evaluation
Controlled thermal cycling
Instant thermal shock testing

Standard Configuration

Two sets of specimen baskets
Hour meter
1 observation window (insulating glass with transparent heating film)
6 caster wheels (including leveling feet)
1 sample power control terminal
1 RS-485 communication port
1 RJ-45 Ethernet port
USB port

Technical Parameters

Model			TS-120SA	TS-120SW	TS-300SW
Chamber volume (L)			Approx. 120		Approx. 300
Test system			2-zone,basket moving up and down driven by motor and screw
Performance	High temperature zone	Temperature range	60℃~ 220℃
		Temperature rise rate	≥10℃/min
	Low temperature zone	Temperature range	-80℃~ 70℃
		Temperature rise rate	≥2℃/min		≥1.5℃/min
		Temperature drop rate	≥4℃/min	≥5℃/min
	Test area (basket)	High-temperature exposure range	60℃~ 200℃
		Low-temperature exposure range	-70℃~ 70℃
		Temperature fluctuation	1℃
		Temperature deviation	±2℃ (≤150℃)，±3℃ (>150℃)
	Temperature recovery performance	Temperature recovery time	≤5min
		Basket transfer time	≤10sec
		Test requirements	High temperature exposure: 150℃ 30min Low temperature exposure:-55℃ 30min Specimen weight:3kg (plastic mold IC in two sample baskets)		High temperature exposure: 150℃ 30min Low temperature exposure:-55℃ 30min Specimen weight:10kg (plastic mold IC in two sample baskets)
		Conditions	Sensor position:Near the center of the test area. Cooling water temperature: 25°C (only for water-cooled models). Power supply voltage:According to specified voltage requirements.
Internal dimensions (mm)			W470×H410×D650	W470×H410×D650	W770×H610×D650
External dimensions (without protrusion) (mm)			W1250×H2607×D2900	W1000×H2607×D2530	W1360×H3074×D3135
Rated power (kW)			16.5	15	35
Condensing method			Air-cooled	Water-cooled

For air-cooled models, the stated performance is based on ambient conditions of 25 °C with relative humidity ≤85%, measured with no test specimens inside the chamber. For water-cooled models, performance is based on ambient temperature between 15 °C and 35 °C, relative humidity ≤85%, and cooling water temperature ≤ 28 °C, also measured without test specimens inside.

Related Manufacturies