Extrusion Press (for Φ80mm Rod)
Aluminum Rod Press, Rod Extruder, Aluminum Extrusion Machine
As being an indirect extrusion machine, this aluminum rod extruder has some features different from direct extrusion press. For example, the ram forces the billet to move forward and pass through the die opening in direct extrusion. However, in indirect extruder, the die is mounted to a hollow ram and finished products will come out from the inner bore of the ram.
Major Features of Indirect Extrusion Press
1. Because of no relative movement between container and billet, there will be no friction or heat during the machine operation.
2. To complete the same extrusion work, 25%-30% extrusion force will be decreased in comparison to the direct extruder.
3. The aluminum extrusion machine is capable to process profiles with a smaller cross sectional area under lower temperature but higher extrusion speed.
4. Stable mechanical properties and performance can be easily achieved thanks to uniform aluminum flow, small extrusion hole and low residual pressure.
| Model (Al) | Rated pressure (MPa) | Size of standard aluminum billet (mm) | Max. circumcircle of profile (mm) | Max. width of profile (mm) | Size of die (mm) | Central height of machine (mm) | Total power (kW) | |
| Metric ton | Short ton | |||||||
| 21 | Φ178×770 | Φ80 | 80 | Φ186×120 | 1400 | 330 | ||
| 21 | Φ178×820 | Φ80 | 80 | Φ186×120 | 1400 | 330 | ||
Applications of Aluminum Rod
Aluminum rods and plates processed by this extrusion equipment find wide application in home decoration, office furniture, solar system, to name a few.
Notes
1. Limited by the hollow raw, the applied load cannot exceed a certain range.
2. Limited by the size of die, profiles with complex cross section cannot be processed.
