Spray Dryer (with High Pressure Pump)
The YPG's spray dryer with a high pressure pump sprays raw material in liquid or paste form as a fine mist. When the mist comes into contact with hot air, it dries into small granules. The final product is collected from the base of the pelletizer's tower and cyclone separator.
Features of the YPG Spray Dryer
1. This chemical equipment has a fast drying speed and is suitable for drying heat sensitive material.
2. The end products from this high speed drying equipment are shaped like granules or pellets and have good uniformity, solubility, fluidity and purity.
3. The lab spray dryer can be used for drying liquids or cooling melted solids.
4. The YPG spray dryer allows you to adjust the product size, solubility, bulk density and color of the end product within specific ranges.
Technical Parameters of the YPG Spray Dryer
| Model | Unit | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
| Evaporated moisture | kg/h | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
| Overall size (Ø×H) | mm | 1600×8900 | 2000×11500 | 2400×13500 | 2800×14800 | 3200×15400 | 3800× 18800 | 4600× 22500 |
| Pressure of pump | M P a | 0.5-8 | ||||||
| Power | KW | 8.5 | 14 | 22 | 24 | 30 | 82 | 30 |
| Inlet air temperature | ℃ | 300-350 | ||||||
| Collection rate | % | >97 | ||||||
| Electric heater | KW | 75 | 120 | 150 | When the temperature is lower than 200℃, the parameters should be calculated according to the specific conditions. | |||
| Electric steam | MPa KW | 0.5 54 | 0.6 90 | 0.6 108 | ||||
| Hot air furnace | Kcal/h | 100,000 | 150,000 | 200,000 | 300,000 | 400,000 | 500,000 | 1200000 |
